I am going to instruct how to charge bike and car batteries at home.
Hi readers this is my first post and this is a DIY(Do It Yourself).Charging the batteries would be easier now to at your home.Now you dont need to waste any money to charge your battery you can do it at home easily.The problem with battery recharge shops is that their time is not flexible as its advised to charge batteries for 8 hours.Bellow are the steps to charge the bike battery at home
To charge the battery you will need:
1.An UPS(home or pc UPS)
2.A battery
3.Thick wires(preferable)
4.meter gauge(optional)
5.Distilled water( preferred )
Note:For best results flush the water in the battery and add new distilled water which can be found at the petrol bunk or automobile shops
1.first open up the UPS.
2.screws could be found at the bottom.
3.After opening remove the battery terminal.If you like you can leave the battery or else you can remove it.
4.connect the terminals with the dead battery thru a cable.
5.**keep the caps of the water shells open while charging**
6.power on the UPS and DONT PRESS THE POWER SWITCH OF THE UPS.pressing the power switch will direct the AC current to the power ports and the battery will stop charging please keep it in standby position.
Charging the battery for 8 hrs is preferred even though,my almost dead battery was charged at 6 hrs.
Have been tested only with 5L-B battery.I think you can use all automobile batteries.Cars batteries would take more time to charge but better for a jump start.
If you have any doubts regarding charging your bike or car battery at home please let us known by leaving comment below.Thank you!
1 comments:
really helpful!
Post a Comment